Having your AC fixed can be a hassle for most people most especially those in the industrial work places. One of the common problems people encounter from their AC is the sudden turning on and off of the air cooling system. It’s a very infuriating issue most especially on days wherein you need to cool yourself off from a summer day. It may run for a few minutes but then suddenly hear it shutting off, and this cycle can go on for a few times of operation. This issue can impose a lot of problem from a sudden spike of your electricity expenses to eventually degrading the cooling efficiency of your AC that will lead to destroying the unit as a whole.
This can be explained by a problem found in the internal system of the AC wherein it experiences a short cycling mechanism. A result would be a fluctuation in the electricity which causes a spike in electricity consumption. If not fixed right away, this can be a very costly problem for a lot of homeowner that should be addressed. There are several ways that one can be done to do regularly to prevent it from happening and another would be seeking the help of AC technicians from Oasis Aircon Services to solve the common problem experienced by many.
Checking for Signs of an Aircon Turning On and Off
Check the Air Filters
One of the several indications of the unexpected power outage in air cooling system are dirty air filters. Dirty air filters cause a lot of problems which includes the mechanism of its power. Clogging of the air filters can restrict air flow which causes other problems to occur like frozen evaporator coil. This underlying problem will ultimately cause the system to malfunction. As a result of this chained problem, the AC will demonstrate sudden turning off and on without user manipulation.
Assess the Thermostat location
The thermostat in air cooling system is an integral part of the operational cycle. Its particular placement also plays a vital role on how the AC works inside a space. Many homeowners mistakenly situate their thermostat in places that falsely detects the true temperature of the room. A common mistake would be placing them in high temperature areas in the room like the kitchen or an area where sunlight usually comes in. This will cause the thermostat to detect a higher than the normal temperature. If the thermostat is improperly placed in an area, this would be cause the system to
not efficiently cool the room which causes it to shut down or cool down earlier or before it actually reaches the optimal temperature.
Sizing of AC System It is always an important factor to consider not just the brand of the AC but to also assess its specifications and size that is appropriate to the space where it will be installed. Having it too big or too small impose problems during its operation. Having a smaller AC for a big rom will use a lot of energy to cool the space and having a big AC on the other hand for a smaller space can cause “short cycle”. This should result to a frequent operation in short periods which would eventually destroy the unit.
Solutions to Aircons Turning On and Off
Clean the Air Filters Dirty Air Filters in air conditioning system can be the root of most problems including unexpected fluctuation of power. The best possible solution to this problem can be done by you. To avoid clogged filters, make it a point to regularly check if it needs cleaning. If there are minimal dusts seen, vacuuming the grids can be done. If it is left not cleaned for a very long time, one must remove the filters and wash it with a mild detergent with running water. Mildly hot water can be used to remove very stringent dirt. This will prevent short cycling of the system unit that causes power fluctuation.
Find the right AC for your space One of the causes that results to short cycling, which has disadvantage in operation of AC, is choosing the wrong AC size for your space. This should be prevented by choosing the right AC servicing company if you are having doubts and dilemma on choosing the right AC system for your space. With their expertise, they can properly asses and evaluate the issues causing the short cycle and properly recommend the right air cooling system suited for your room.
Find an appropriate placement for the thermostat The basic mechanism of the thermostat is to properly assess the temperature of the area in order to send a signal to the AC system whether it is time to lower or increase the cooling power. This is why its functionality is very important. To solve the problem of the constant turning ON and OFF of your AC system due to the wrong placement of the thermostat, you just simply look for another location that will better assess the current state of the temperature inside the room. This is a simple fix that can be done by you or your AC technician.